When it comes to choosing the right water tank, the most important factor in a good purchase is the quality. However, if you don’t know what to look for, it’s easy to get fooled into thinking that buying a cheap but low-quality tank is a good choice.
In this article, you’ll learn the different types of water tanks and some important considerations when buying one.
Image by rony michaud
Types Of Water Tanks
Water tanks come in different materials, sizes, and shapes, which you can check on this page on The Tank Factory for more info. Here are the most common ones below:
- Corrugated Steel Water Tanks
Corrugated steel is one of the most affordable options that are available and it’s the easiest to install. The tank itself is a cylinder, which is about the same shape as a soda can, and is filled with water. It doesn’t require an in-ground pump because it doesn’t take water from outside.
If you’re looking for a water tank that’ll last for years and is built to withstand the rigors of a family’s daily use, then this is the tank to choose.
Here are good-to-know things about steel water tanks:
- It can be used in any location in your home where a water dispenser or fountain would be.
- If you’re thinking of using an in-ground tank for your water dispenser, then you need to make sure that the tank is at least 16 feet in length. This will allow the water to drain properly and will help prevent leaks.
- One tank can hold up to four gallons of water at any given time. So, if your dispenser has more than this number of gallons that are regularly dispensed, you’ll need to purchase additional tanks to keep them stocked.
- Polyethylene Water Tanks
Polyethylene water tanks may be the best choice because of the following reasons:
- Polyethylene water tanks are resistant to chemical reactions and corrosion.
- It has a high level of thermal conductivity, which means that it conducts heat very well.
- Since it can be used in humid climates without any problems, it’s also resistant to high humidity. This type of water tank also has a good chemical resistance, which means that it can resist different chemicals in the water.
- Fiberglass Water Tanks
A fiberglass water tank can provide many years of dependable service. Here are some pieces of information about water tanks:
- When it comes to installing a water tank, fiberglass is not only very durable but it’s also very cost-effective. You can bury a fiberglass water tank without worrying about failure. Also, this type of water tank won’t rot or rust over time.
- Because of their impressive strength-to-weight ratio, a major advantage of fiberglass water tanks is you can place them anywhere. They’re commonly used for replacing old, heavy water tanks.
- Since they’re lightweight, they can easily be added to a building without any additional hardware.
- A fiberglass reinforced plastic (FRP) water tank’s average life span is 20 to 30 years.
Water Tank Buying Tips
There are many factors to consider when deciding on the right water tank for your home. Here are some guidelines to help you choose one:
- Before you purchase any type of water tank, determine what type of water you currently have coming in. Do you have soft or hard water? This is important since there are different types of filtration devices for different types of water.
- Consider the size of the unit that you’ll be purchasing. You should also consider the location of the tank.
- Another important factor to look at is how you’ll be able to connect your water filter to the tank and how easy is it to clean the tank. If you have a water purifier in place, there’s no need to purchase a separate water tank.
- Make sure that the tank is rated for the amount of water that it’s going to house. If the tank that you choose is not rated properly, you might end up with less than the desired levels of water in your system.
- Take some time to decide exactly what your needs are. If you only have one family member in your household who needs a high-quality water supply, then purchasing a high-efficiency tank may be ideal. If you want to purchase a filter to meet your entire household’s water requirements, then purchasing a whole-house unit may be the best option.
- Make sure that the tank that you’re purchasing is compatible with your existing filtration system. If you have a pressure washer filter on your unit, it wouldn’t be helpful if you purchased a water tank that has water pressure. This can lead to expensive repairs on your existing filtration unit.
Conclusion
There are many types of water tanks you can choose from. For instance, corrugated steel tanks are durable and long-lasting. Fiberglass water tanks are lightweight and rust-resistant. Lastly, polyethylene water tanks are also durable with high thermal conductivity.
If you need a water tank that can meet your needs, you should keep the above things in mind while shopping. This will help you make the right choice and find the water tank for your needs.
